Product Details
Spray Drying Equipment
Spray Drying Equipment is widely used for drying the chalk slags, coal powder, slags, clay and other materials in the building materials, metallurgy, chemical industry, cement industry. The rotary dryer has a better adaptability and can dry various materials with a simple and reliable operation.
Our factory is a joint-stock enterprise which mainly produces large and medium-sized series of dryers, ball mills, rotary kilns and coal gasifier. This company merges research&development, manufacture sales into a whole and all of them are ISO9001:2008 confirmed.
Spray Drying Equipment and Power Drying Machine
Spray Drying Equipment is mainly composed by the revolving body, lifting plate, driving device, supporting device, sealing ring and other components. So it has the advantages of reasonable structure, perfect in workmanship, high yield, low energy consumption, convenient to operate.
Spray drying can dry many kinds of materials which contain moisture, such as coal, coal slurry, slag, industrial waste, and clay stone. It is widely used in building materials, metallurgy, and chemical industry. Spray dryer is handing by bringing it into direct contact with a heated gas. The drying is made up of a large, rotating cylindrical tube, the dryer slopes slightly so that the discharge end is lower than the material feed end in order to convey the material through the dryer under.
Spray Dryer
Material to be dried enters the dryer, and as the dryer rotates, the material is lifted up by a series of internal fins lining the inner wall of the dryer. When the material gets high enough to roll back off the fins, it falls back down to the bottom of the dryer, passing through the hot gas stream as it falls. This gas stream can either be moving toward the discharge end from the feed end (known as co-current flow), or toward the feed end from the discharge end (known as counter-current flow). The gas stream can be made up of a mixture of air and combustion gases from a burner, in which case the dryer is called a direct heated dryer. Alternatively, the gas stream may consist of air or another (sometimes inert) gas that is preheated. When the gas stream is preheated by some means where burner combustion gases do not enter the dryer, the dryer known as an indirect-heated type. Often, indirect heated dryers are used when product contamination is a concern.
Technical ParametersOur dryer adopts new Spreading plate device, which has guidance, flow, material functions. It can make the material content in the dryer radial cross section to full uniform, material will become thin and all. The state of the heat flow entirely can achieve the purpose of making full use of the heat. Our dryer choose reasonable operating parameters, coal consumption and power consumption of general baked dry machine more than 10-15%, one machine yields above 10-15%. It has been widely used in the cement and mineral processing enterprise.
| Type(mm) | Gradient(%) | Rotational speed(r/min) | Inlet air temperature(。c) | Power(kw) | Prod capacity(t/h) |
| MGT600 | 3-5 | 3-8 | 3 | different materials different production capacity |
|
| MGT800 | 3-5 | 3-8 | 4 | ||
| MGT100 | 3-5 | 3-8 | 5.5 | ||
| MGT1200 | 3-5 | 3-8 | 11 | ||
| MGT1500 | 3-5 | 3-8 | 15 | ||
| MGT1800 | 3-5 | 3-8 | 18.5 | ||
| MGT2000 | 3-5 | 3-8 | 22 | ||
| MGT2200 | 3-5 | 1.5-6 | 30 | ||
| MGT2400 | 3-5 | 1.5-6 | 37 | ||
| MGT2600 | 3-5 | 1.5-6 | 40 | ||
| MGT2800 | 3-5 | 1.5-6 | 55 | ||
| MGT3000 | 3-5 | 1.5-6 | 75 | ||
| MGT3200 | 3-5 | 1.5-5 | 90 | ||
| MGT3400 | 3-5 | 1.5-5 | 110 | ||
| MGT3600 | 3-5 | 1.5-5 | 150 | ||
| MGT4000 | 3-5 | 1.5-5 | 190 | ||
| MGT4200 | 3-5 | 1.5-5 | 200 | ||
| MGT4500 | 3-5 | 1.5-5 | 260 |
About us
1. the company professional to do carbon and solid fuels.
Equipment & technology
2. the quality of solid fuel and production is the biggest supplier in
Service
3. stable product quality , supply, the good faith management
Product Processing
Product Packing
Relevant Pictures