1 Product name: lab spray dryer
2 Main Application:
The drying speed is high when the material liquid is atomized,the surface area of the material will increase greatly.In the hot-air flow,95%-98%of water can be evaporated at a moment.The time of completing the drying is only several seconds.This is especially suitable for drying the heat sensitive materials.
Its final products own the good uniformity,flow ability & solubility.And the final products are high in purity and good in quality.
Its operation is simple and stable,its control is simple and convenient,and it easy to realize automatic operation.
The procedures of production are simple,it suit the material liquid of 40%-90% water to powder by drying continuously ,and reduce the procedure of smash and sieve,the healthful condition of operational environment is superiority,and can avoid powder flying when drying.
3 Principle:
After been filtered and heated,the air enters into the air distributor on the top of the drier.The hot air enters into the drying room in the spiral from uniformly.Passing through the high-speed centrifugal sprayer on the top of the tower,the material liquid will rotate and be sprayed into the extremely mist liquid beads.Through very short time of contacting the heat air,the materials can be dried to the final products.The final products will be discharged continuously from the bottom of the drying tower and the final products.The final products will be discharged continuously from the bottom of the drying tower and from the cyclones.The waste gas will be discharged from blower.
4 Technical specifications:
5 Machine Parts:
6 Our Workshop:
7 Packaging & Shipping:
nude packing or wooden cases
8 Maintanance:
one year guarantee for whole machine
24 hours technical support by email
calling or door-to-door service
user manual and detailed video/CD
9 Certificate:
10 Our Company:
