Electric Lab Industrial Spray Drying Equipment

Electric Lab Industrial Spray Drying Equipment

Technical Date for Electric Lab Industrial Spray Drying Equipment

Working Principle for Electric Lab Industrial Spray Drying Equipment
Hot air is distributed downwards with spiral method into the drying tower after filtering and heating. Meanwhile, solution is nebulized millions of single granule and form fog drop. Then the fog drop contact with the hot air and most of the water flash immediately to form the dry product. These powder and granule fall into the air exhaust pipe at the bottom of the drying tower, collected in the material tank.

The features of Electric Lab Industrial Spray Drying Equipment
Introduction

• The pressure spray drying machine is widely used in liquid process industry.
• Machine body, pipe, separator of set where connect with the raw material are made of SUS304.
• Line noise, balanced running, controlled temperature, easy installation are fruit dryer's features.
• Using forced ventilation, equiping with adjustable air divider plate, uniform drying. Heat source can be steam, hot water, electricity.
• Easy to operation
• Excellent after-sales service

Character of Electric Lab Industrial Spray Drying Equipment

• 1). The dry speed is fast and suitable for drying thermal sensitivity material particularly.
• 2). According to the characteristics of raw material, it can use hot air to dry or cool air to franulate.
• 3). The evaported amount is related to characteristics of raw material.

Working Steps

• 1. Atomizing: Atomize raw material into uniform fog drop through atomizer
• 2. Contact between fog drop and hot air: The hot air enters to the drying station to contact with fog drop through air distributor, and make a certain movement in drying station. (the movement can be co-current flow, adverse current or mixed flow)
• 3. Drying Process: Fog drop has big surface area, and appears obvious grades to hot air both in temperature and humidity, thus strengthn the transmission process of plastid caloric, moisture of fog drop is evaporated very quickly (within seconds to tens of seconds)

Important Tech

• Atomization: Atomizing System must ensure the spray drop distributing uniformly.
• The contacts of hot airflow and spray drop: when enough hot air enters into drying tower, the flow way and angle have to be considered, no matter co-current flow, adverse current or mixed flow, must ensure the sufficient heat exchange, it is crucial.
• The angle design of the connection pipes and cones: it is very important to select the suitable angle, here we would like to share our experience from production of thousands of this equipments.

Wide Range of Use

According to the characteristics of material , Both hot air drying and cold air condensed solid droplets two methods can be adopted, a large number of products with very different physical properties can use this device to perform production. commonly used with the following types of polymers and resins, dyes, colors, color materials, ceramics, glass, rust remover, fungicides, insecticides, carbohydrates, dairy and egg products category, tannins, slaughterhouse by-products, blood and fish products, detergents and surfactants category, type of fertilizer, organic compounds and inorganic compounds.

Payment Term

If the total amount below $5000, it should be 100% prepayment.

If the total amount above $5000, it should be 50% prepayment; the balance paid before loading.

Delivery Time

30 working days after prepayment received

Quality guarantee

One year after shipment excluding the wearing and tearing parts.

Validity of the quotation

This quotation is valid for one month

Installation

We will assemble and test the machine before packing. Also send English manual. If customer need, we will send one engineer for assembling and training of workers. USD100 per person per day, food, accommodation and air-ticket will be on clients.

Why Choose BETTER?

1.We are Electric Lab Industrial Spray Drying Equipment Assessed 6 years Gold Supplier.

2.We are a factory manufacturing Electric Lab Industrial Spray Drying Equipment , best production capability, best quality control, best Service.
3.Inspected by the Inspection Institution of Bureau Veritas Certification.
4.100% QC inspection Before Shippment.
5. CE listed,competitve price.

Send your Inquiry Details in the Below, Click "Send" Now! Specific information and Accurate quotation
are waiting for you.