high temperature and LOW PRICE Vacuum Drying Oven for laboratory Drying Oven for laboratory
oven for drying thermal sensitive, easy to decompose and oxidative material and design, to the internal inert gas, especially of some compound material can also be a quick drying. Widely used in pharmaceutical, electronic and chemical industry.
2 product features
1, with the function of timing digital microcomputer temperature controller, temperature control is accurate and reliable.
2, cuboid chamber, as to achieve the maximum of effective volume.
3, toughened bulletproof double glass door, to observe the object in the working chamber at a glance.
4, can adjust tightness of the door is closed, the overall molding silicon rubber sealing ring, to ensure the high high temperature and LOW PRICE Vacuum Drying Oven for laboratory degree in the cabinet.
5, the working chamber is made of stainless steel plate (or wire-drawing sheet). Ensure durability.
3 product specifications and technical parameters
TECHNICAL DATA:
Type |
STA-9079A |
STA-6090 |
STA-6050 |
STA-6020 |
Power voltage |
380V 50Hz |
|||
Input power |
3400W |
1500W |
1400W 12000W |
|
Temperature scale |
RT+10~500°C |
|||
Temperature fluctuation |
±1°C |
|||
high temperature and LOW PRICE Vacuum Drying Oven for laboratory rate |
||||
Core dimension |
400×400×450 |
450×450×450 |
415×345×370 |
300×300×275 |
Overall dimension |
600×600×1460 |
610×680×1460 |
710×560×550 |
590×490×450 |
Supporting board |
Two(independent temperature control) |
two(independent temperature control) |
two/three |
one/two |
Working chamber material |
Stainless steel(1Gr18Ni9Ti) |
Cold rolling sheet(08F) Stainless steel(1Gr18nI9tI) |
||
4 housing structure
1, smart LCD temperature controller program
2, the inert gas inlet valve
3, import high temperature and LOW PRICE Vacuum Drying Oven for laboratory gauge
4, lower housing
high temperature and LOW PRICE Vacuum Drying Oven for laboratory drying oven shell by steel plate stamping fold system, welding forming, shell surface adopt high strength electrostatic plastic spraying coating treatment, paint film is smooth and firm. The working chamber is made of carbon steel or stainless steel plate welding and become, studio insulation between the shell and filling cotton. Studio inside the sample (s) with the racks, used for all kinds of test items, work around the outdoor wall with mica heaters. Door gasket article adopt silicon rubber seal, the door is used by an available for viewing on sight glasses. Electric high temperature and LOW PRICE Vacuum Drying Oven for laboratory drying oven and gas are controlled by electromagnetic valve, the electrical box bottom, or left of the enclosure mounted on the front panel of the electrical box high temperature and LOW PRICE Vacuum Drying Oven for laboratory gauge, temperature control instrument and control switch, electrical box is equipped with electrical components.
5 using the environment
1, temperature: 5 ~ 500 °C
2, relative humidity: 85% RH or less
3, power supply voltage: AC380V plus or minus 10% 50 hz
Around 4, strong vibration and corrosive gas
6 characteristics
1, the oxidation are suppressed
high temperature and LOW PRICE Vacuum Drying Oven for laboratory furnace of iron oxide is based on the following two reasons: on the one hand, because of high high temperature and LOW PRICE Vacuum Drying Oven for laboratory degree, the oxidation medium is extremely thin, gas - solid interface on the oxidation reaction speed is very slow, no visible oxide film formed. On the other hand, under the condition of high temperature and LOW PRICE Vacuum Drying Oven for laboratory heating, equivalent to in a protective atmosphere heating, inhibit the oxidation of iron. And due to the increasing the proportion of reducing gases H2, CO, even with trace oxidation, the formation of oxide film will be restored.
2, purifying effect
In a high temperature and LOW PRICE Vacuum Drying Oven for laboratory furnace under the condition of oxygen tension is low, metal oxide can be decomposed into the oxide, oxide in a high temperature and LOW PRICE Vacuum Drying Oven for laboratory heating easy sublimation and volatilization, walk by a specific high temperature and LOW PRICE Vacuum Drying Oven for laboratory pump. In addition, attached to the surface of the oil is a compound of carbon, hydrogen, oxygen and vapour pressure is higher, under the condition of high temperature and LOW PRICE Vacuum Drying Oven for laboratory heating volatile or decomposition, high temperature and LOW PRICE Vacuum Drying Oven for laboratory pump away, have the effect of purify surface.
3, degassing effect
Usually, there is always a certain amount of gas dissolved in the metal, such as H2, O2, N2, etc., under the condition of high temperature and LOW PRICE Vacuum Drying Oven for laboratory heat treatment, the higher the degree of high temperature and LOW PRICE Vacuum Drying Oven for laboratory, the lower the air pressure, the higher the temperature, the more conducive to spread to the metal surface gas evolution.
4, evaporation
Very little pressure evaporation of the metals and their alloys, but under the condition of high temperature and LOW PRICE Vacuum Drying Oven for laboratory heat treatment, metal surface alloying elements of evaporation is very serious, and sometimes it will cause poor surface alloying elements, which changes the alloy tissue, decreased mechanical properties.
5,In a high temperature and LOW PRICE Vacuum Drying Oven for laboratory heating, because of the thin gas, conduction, convection and radiation in only three types of heat transfer is given priority to with radiation, and under 600 °C, the radiation effect is very weak, so a high temperature and LOW PRICE Vacuum Drying Oven for laboratory heating speed is slow.
