Naturally Hydrophobic PTFE membrane sterile vent filters for cooling / drying equipment

Incorporate the full range of

filter media

PES, PP, PTFE, NYLON66, PVDF for options.

For small and medium batch

processing

They are ideal for use in small batch and critical

point-of-use applications, in liquid or gas service.

Removal rating from 0.1um

to 50um

Two connections are available

214 - Single Open End cartridge, one end is flat

sealed and another end open with one internal

O-ring

216- Single Open Eend cartridge, one end is flat

sealed and another end open with two locking ears

and two external O-rings

Filtration Surface Area

0.12M2 to 0.23M2

Materials

Filter Media: PES,PP,PTFE,PVDF,NYLON,CN-CA,etc

Support Layers: Polypropylene

Inner core: Polypropylene

Outer Support: Polypropylene

Cartridge Dimensions

(Nominal)

Outer Diameter: 56mm

Length: 70mm (Including adapter)

125mm(Including adapter)

Cartridge Purity

Free of surfactants, resins, binders and adhesives

Table 1:Filter Media and Pore

Size available

Typical Applications

Particulate control and microbial contamination;

Laboratory solutions;

Filtration in CD/DVD manufacturing process;

Filtration for optical resin gum;

Small and medium batch processing applications;

Flow rate less than 11L/min or 102 Nm3/ hr

Optical resin filtration

Operating Conditions

Normal Operating Temperature: Up to 60℃ (140℉)

Max.Operating Temperature.: 80℃ (172℉)at P≤1.0 bar (14psi)

Max. Differential Pressure:

Normal Flow direction 4.2 bar (60 psi) at 25℃ (77℉);

Reverse flow direction 2.1 bar (30psi) at 25℃ (77℉)

Sterilization

Steam Sterilization for 30 minutes at 121±2 ℃

Materials Safety

Meet the current FDA and 2002/72/EC standard.

Endotoxin:

Extractables:

Pharmaceutical grade; Filter Media:PES; Micron:0.1um; Length:70mm;

ADAPTER: 214; Oring: Silicone.

Selection Code is: PXFIPS0102141S