Product Details

Good price Rotary kiln type gypsum powder machine plant

Place of Origin China
Brand Name laboratory drying equipment
Model Number laboratory drying equipment
Min.Order Quantity One set Good price Rotary kiln type gypsum powder machine plant
Price [email protected]
Delivery Time contact with us
Payment Terms paypal,UnionPay, Visa/MasterCard, Amex, Discover,T/T
Supply Ability 24

Product Features

Good price Rotary kiln type gypsum powder machine plant

Brief introduction

Rotary Kiln is the key equipment of cement clinker dry -process and wet -process production line, and is also used in various industries such as metallurgical , chemical industry ,building refractory ,environ mental protection industry , etc .

The kiln is composed the cylindrical shell ,roller supporting device ,supporting device with thrust roller ,driving gear unit moveable kiln head ,sealing device at kiln inlet ,coal dust pipe device etc

The kiln shell is designed to keep some inclination to level .It is supported by the roller supporting device and equipped with thrust roller device to control the up and down moving of the shell .The driving system is equipped not only the main driving gear unit but also the auxiliary driving used to keep the shell rotating even when the main power is broken so as to prevent the shell from any bending and distortion .As the kiln head and tail are sealed by advanced technology ,the sealing of the kiln is fairly reliable.

Feature

1. low energy consumption or energy saving way of calcination

2. reasonable design so that the waste heat can be most effectively reused

3. rotary kiln is equipped with dust catcher to filter waste gas and dust to meet the standard of waste gas emission.

4. the fans with realiable performance to guarantee the calcinating condition

5. high automation level

Working principle

Rotary kiln is installed with slope, generally 4-5%. The motor drives the gearwheels to rotate. The materials to be calcinated are put into the feeding port, which is on the higher side. While the lime rotary kiln is rotating, materials go through the cylinder of lime kiln. The cylinder can be divided into four areas: feeding area, preheating area, main calcinating area and cooling area. After going through these four areas, materials are discharged. Generally the discharging port of lime kiln is connected with cooler so that the discharged materials can go to the cooler to lower the temperature.

Technical

Factory view

Worksite

Contact information

All Products Contact Now