CE approved FR Series Small Lab Milk and Egg Powder Spray Dryer
Performance characteristics of spray dryer
1.Drying speed is fast, solid-liquid surface area greatly increased after the spraying in the hot air flow, the moment
can be evaporated moisture of 95% -98%, and only a few seconds to complete the drying time, especially for
heat-sensitive materials drying.
2.The product has good uniformity, mobility and solubility products of high purity, good quality.
3.The production process is simplified, convenient control. For special materials for a moisture content of
40-60% (90%) of the liquid can be dried into a powder or grain products, after drying without crushing
and screening, to reduce the production processes, to improve product purity.
4.On product particle size, bulk density, moisture, within a certain range by changing the operating conditions to
adjust, control and management is easy.
Technical Requirements of spray dryer
- 1.1 drying parameters
- Air inlet temperature: 180 ℃
- Air outlet temperature: 75 ~ 80 ℃
- Can spray volume: 300kg / h
- Dewatering capacity: 100kg / h
- Heating:Gas+electric
- 1.2 Power Requirements: Voltage: 380V 3 phase 50Hz
- 1.3 Exhaust emptying dust content ≤ 50mg/m3 standard dry air
- 1.4 site conditions
- Factory site:
- Atmospheric pressure: 760mmHg
- Ambient temperature: ≥ 0 ℃
- Relative humidity: 60%
Packing :Export standard wooden case or carton
Shipping:by sea, by air, by express etc.
Our Services
Welcome to contact me !!!