Calcium chloride spray dryer/spray dryer for powder/laboratory spray dryer machine
Wide application:
For drying soy sauce,pig blood,tomato,milk and egg for making final powder.
Technical parameter:
Model |
AUS10S |
AUS5S |
water evaporation |
10kg/h |
5kg/h |
Original water content |
50-90% |
50-90% |
Final water content |
3% |
3% |
Inlet air temperature |
150-300℃ |
150-300℃ |
Outlet air temperature |
80-90℃ |
80-90℃ |
Heating way |
Electric heating |
Electric heating |
Air pressure |
-458~ -239pa |
-258~ -239pa |
Air volume |
150-550m3/h |
150-250m3/h
|
Finished product recovery rate |
More than 99% |
More than 99% |
Main parts:
1.Main tower
quantity 1
Inner size φ1.3m
Material SUS304
Inner wall precision polishing
Outer wall heat preservation
2.Atomizer
Rotating speed 18000rpm
Material SUS304
3.Feeding system
Screw pump quantity 1
Working pressure 18000rpm
Rate of flow 0.3-1.0 m3/h
Power 0.55kw
Material SUS304
4.Heating system
Electric heating pipes quantity 18
Power 18kw
Hot air pipe 1 set
Material SUS304
5.Finished product collection system
First grade cyclone separator
Second grade cyclone separator
Material SUS304
Air-hammer quantity 3 in the place outer wall of tank and cone
6.Fan
Induced draft fan quantity 1
Power 2.2kw
Material carbon steel
7.Control system
Electrical apparatus control system:
centralized control with direct starting
Inlet air temperature display
Outlet air temperature display
Feeder stepless speed regulation display
System running indicator light display
Features:
1.High spped:
The superficial area of raw material becomes big after atomization,so evaporation happens to 95%-98% water content in seconds in the hot air.
Especially used for heat sensitive raw material.
2.It is to simplify production process and easy to control.
For liquid with water content 40%-60(even up to 90%),
this dryer machine can make it into powder particle in one time.
After drying,it does not need to crush and screen,
which reduces the production process and improves the purity of final products.
3.The particles size and density and water content can be adjusted within certain limits,easy control.
4.All electric components is with interlock control and fan is with air volume control valve manually
5.In the inlet,there is primary filter and medium efficiency
In order to offer you the suitable machine,please confirm the following firstly.
1.What is your raw material and what is the water content of your raw material?2.What is the final water content you need to dry?3.What is the input capacity kg/h you need?4.Do you have requirement about heating source,electric or steam or coal or oil or gas?5.Do you have requirement about materials to make the machine?carbon steel or stainless steel? Any question and detailed requirement you have,do contact me.