Product Description
lab spray drier
Description:
spray drying machine is a special equipment and is suitable for drying emulsion,suspending liquid,liquor and so on .Particularly it has unique for drying polymers and resins; dyestuff and pigment; ceramics, glass; derust agent; pesticide; carbohydrate, dariry products; detergent and surfactant; fertilizer, organic compound, inorganic compound and so on.
Features:
Its dry speed is very quick. In genral,it need 5-15 seconds. It has feature of momentary dry.
Because raw material can be dried momentarily. Especially, it is suiable for drying thermal sensitive raw materials. It can maintain color, smell and smell of raw materials.
Its operation is stable and simple. Its regulation and control is very convenient. It is easy to realize continuous operation.
The distribution, fluidity and solubility of product are good.
Principle of work:
Air is turned into hot air through air filter and heater and enters into hot ar distributor at the top of dry chamber and then enters into dry chamber and rotates in the state of helix. At the same time liquid of raw material is sent to centrifugal atomizer at the top of dry chamber pumped by pump through filter, lnwhile liquid of raw material atomizers small drops. Air ad liquid of raw material flow and contact each other fully. The moisture vaporize rapidly. Liquid of raw material is dried into finished product in a short time. The finished product is discharged through cyclone seperator at the bottom of drier. The wasted air is exhausted through fan.
Detailed ImagesTechincal ParameterFeatures♦ Quick drying speed. In the hot air stream, 95% to 98% of moisture can be evaporated immediately.
♦ It is especially suitable for drying thermal sensitive material.
♦ The product made by the machine has good uniformity, fluidity and high quality.
♦ The productive process is simple and the operation control is very convenient.
♦ For liquid containing 40-60% of damp (for special material, may be 90%), it can be dried to powder product through drying one time. After dried, it is not necessary to crush and sieve. So it reduces productive procedure and raises the purity of product.
The spray dryer for coffee.
This is spray dryer was exported to the Malaysia,which evaporate amount reach to 1800kg/h,the electric+steam to be as the heat source.the most famous be fitting in drying solute drink,coffee,milk,tea and so on.
The spray dryer for sodium silicate.
This is spray dryer are customized by Slovenia, the evaporate amount reach to 2500 kg/h,the electric+oil to be as heat source,it is used widly in chemical filed.
The pilot spray dryer.
This is pilot spray dryer are popular used in pilot plant ,the customer feed the liquid material into it for testing ,
to know much more about the
materal's character.the evaporate amount only 5kg/h,the electric to be as heating source .
1. Chemical Industry:
white carbon,amino acid,catalyst,dyestuff intermediate,sodium fluoride,compund fertilizer,etc.
2. Plastics and resin:
AB,ABS emulsion, uric acid resin,phenolic aldehyde resin,urea-formaldehyde resin,polythene,etc.
3. Food Industry:
oats,chicken juice,coffee,instant dissoluble tea,protein,soybean,peanut protein,hydrolysate,etc.
4. Sugar:
corn syrup,corn starch,glucose,pectin,malt sugar,sorbic acid potassium,etc.
5. Ceramic:
aluminium oxide,ceramic tile material,magnesium oxide,talcum,etc.
1. Design and production
We solicit buyers opinions widely at the design and production stage of equipment; especially at the stage of plan and elevation arrangement, we give full consideration to buyers’ site conditions and public engineering conditions, and pay concurrent attention to the optimum combination when assuring the quality of equipment.
2. Installation and commissioning
After the equipment is delivered to buyers factory, we will dispatch full-time technical personnel to instruct buyers’ installation and to take charge of commissioning until normal use of the equipment.
3. Training
Before buyers use our equipment normally, our commissioning personnel will organize buyers’ relevant personnel to accept training, which covers the maintenance and care of equipment, timely repair of common faults, and procedures for operation of equipment.
4. Warranty
We provide one-year warranty for our equipment. For damage of equipment arising from non-artificial factors within the warranty period, we will provide repair service for free; and for damage of equipment arising from artificial factors, we will provide repair service in time and collect corresponding cost.
5. Maintenance and period
For damage of equipment after expiration of warranty period, we will provide on-site repair service within 24h/48h for enterprises inside/outside the province after receiving buyers’ notification. The service provided after expiration of warranty period is fee-based, and flat cost will be collected each time when the service is provided.
Experienced Case
The spray dryer for sodium silicate.
This is spray dryer are customized by Slovenia, the evaporate amount reach to 2500 kg/h,the electric+oil to be as heat source,it is used widly in chemical filed.
Spray Dryer for instant coffee.
YPG-1800 ,exported to the Malaysia.
Spin Flash Dryer for fly ash.
XZG-3,exported to the Korea.
Mesh Belt Dryer for Onions.
DW5-2x9 ,exported to the Kazakhstan
