Metallic hydrogen double tapered Metallic hydrogen double tapered vacuum drying machine in chemical drying machine in chemical
1.Heating way:steam,hot water,heat conduction oil.
2.When drying slurry material,our factory design special stirring device in the chamber.
3.We have experience technical team to design scheme for u.
Description
SZG double cone Metallic hydrogen double tapered vacuum drying machine in chemical dryer is a new type drying equipment which combines similar product technologies at both home and abroad. This rotary Metallic hydrogen double tapered vacuum drying machine in chemical dryer possesses belt and chain two-stage elastic connection modes. With low center of gravity, this drying machine can operate smoothly. Heating medium and Metallic hydrogen double tapered vacuum drying machine in chemical system adopt reliable mechanical seal or rotating joint, so as to avoid defects such as the regular packing seal is easy to leak. On this basis, we modify this double cone Metallic hydrogen double tapered vacuum drying machine in chemical dryer. It not only embodies the humanized design concept but also meets the GMP standards.
Application
SZG double cone rotary Metallic hydrogen double tapered vacuum drying machine in chemical dryer is applicable for drying and mixing powdery and granular materials in the pharmaceutical, food, chemical, dye and other industries. It is especially suitable for the following materials:
1. Thermosensitive materials that cannot withstand high temperature
2. Easily oxidized and dangerous materials
3. Materials whose solvent should be recovered and materials of poisonous gas
4. Materials required low residual volatile content
5. Materials with requirements on crystal shape
Features
1. This rotary Metallic hydrogen double tapered vacuum drying machine in chemical dryer has advanced design, simple internal structure, convenient to clean and easy to handle.
2. The tubes of heating medium and Metallic hydrogen double tapered vacuum drying machine in chemical system are built in the rack in order to prevent artificial damage and difficult clean.
3. The outer wall and rack sealing plate adopt polishing treatment, and the inner container adopts mirror polishing treatment.
4. The materials in the double cone Metallic hydrogen double tapered vacuum drying machine in chemical dryer can be rotated due to the revolution of the machine, which can minimize material water content (≤0.5%).
5. The materials will not stick to the wall of the container. With big drying rate and energy saving, this rotary Metallic hydrogen double tapered vacuum drying machine in chemical dryer can uniformly and sufficiently dry the materials.
6. Condenser and recycling tank are equipped for recovering organic solvent.
7. Our double cone Metallic hydrogen double tapered vacuum drying machine in chemical dryer has three types of heat source, including steam, hot water and conduction oil.
Technical Parameters
| Model | 100 | 350 | 500 | 750 | 1000 | 1500 | 2000 | 3500 | 4500 | 5000 |
| Volume (L) | 100 | 350 | 500 | 750 | 1000 | 15000 | 2000 | 3500 | 4500 | 5000 |
| Maximum Loading Volume (L) | 40 | 140 | 200 | 300 | 400 | 600 | 800 | 1400 | 1800 | 2000 |
| Maximum Loading Capacity (kg) | 20 | 70 | 100 | 150 | 200 | 300 | 400 | 700 | 900 | 1000 |
| Rotating Speed (rpm) | 3~13 | 6 | 5 | 4 | 4 | 4 | ||||
| Motor Power (k w) | 0.75 | 1.1 | 1.5 | 2.2 | 3 | 4 | 5.5 | 7.5 | 11 | 15 |
| Floor Area (mm) | 2160 × 800 | 2160 × 800 | 2350× 800 | 2560 × 1000 | 2860 × 1300 | 3060 × 1300 | 3260 × 1400 | 3760 × 1800 | 3960 × 2000 | 4400 × 2500 |
| Rotation Height (mm) | 1750 | 2100 | 2250 | 2490 | 2800 | 2940 | 2990 | 3490 | 4100 | 4200 |
| Design Pressure In Container (MPa) | -0.09 to 0.096 | |||||||||
| Interlayer Design Pressure (MPa) | ≤ 0.3 | |||||||||
| Weight (kg) | 800 | 1100 | 1200 | 1500 | 2800 | 3300 | 3600 | 6400 | 7500 | 8600 |
Company introcuction
1.We use high-end imported brands of instruments and processing machines, to create superior quality machine for you ; yutong makes you feel free about the after-sales service.
2.We provide the spare parts with the cost of the spare parts themselves for life long time .
3.We can make the machine based on the customer requirements .
4.We have strong team ,and can help customer to design his process of the product .
5.Guarantee /warranty :1year. calculating from the day of successful installation and commissioning.
Factory inside
Processing&Our team
Service
Pre-service
Introduce the product to the customer in detail,answer the question raised by customer carefully;
Sale service
1.Ensure product with high quality and pre-commissioning before delivery;
2.Delivery on time;
3.Provide full set of documents as customer’s requirements.
After-sale service
Provide considerate services to minimize clients’ worries.
1.Assist clients to prepare for the first construction scheme;
2.Install and debug the equipment;
3.Train the first-line operators;
4. Examine the equipment;5.Take initiative to eliminate the troubles rapidly;
6.Provide technical support;
7.Establish long-term and friendly relationship.
Service commitment
1. Provide clients one-year warranty to make sure the machine work well;
2.We always keep certain inventory level of spare parts, which means the replacements can be sent to you timely;
3.Send every client a preferential quotation.
Centrificate
Exhibition
FAQ
1.Are you a manufacturer ,trading company or a third party
We are a manufacturer ,we set in 2000.
2.Where is your factory located
Our company is located in Changzhou city ,Jiansu province,China .it is In the middle of Shanghai and nanjing