Main Application
magnesium hydroxide spin flash dryer, absorbed the foreign advanced equipment and technology,our factory and Shenyang Chemical Research Institute of the Chemical Ministry of the State have developed this machine.This is a new kind of drying equipment used for drying the materials,such as paste state, cake state, thixotropy,thermal senstive powder and particles.Our factory is equipped with the testing sample machine,which can be used for carrying out the drying tests of various feeds for our users and for to provide the parameters to select the applicable machine.
Principle
Working principle
The hot air enters into the bottom of the dryer in tangent direction.Under the driving of the stirrer,a powerful rotating wind area is formed.The paste state materials enter into the dryer through the screw charger.Under the powerful function effect of stirring at high-speed roation,the materials are distributed under the function of strike,friction and shearing force.The block state materials will soon be smashed and contact the hot air fully and the materials are heated and dried.The dried materials after the de-watering will go up with the hot-air flow.The grading rings will stop and keep the big particles.Small particles will be sidcharged out of the dryer from the ring center and will be collected in the cyclone and dust collector. The not-fully-dried or big piece materials will be sent to the wall of the equipment by centrifugal force and be smashed again after they fall down to the bottom.
Features:
1). This machine combines the magnesium hydroxide spin flash dryerl technology with the fluidity .ejection and smashing step technologies.
2). The equipment is compact and small in size ,high in production efficiency and continuous in the production .It has realized that "a small equipment can perform the large production ".
3). The drying capacity for this machine is big but its energy consumption is low. Its heat efficiency is high.
4). The materiral stay time is very short .The quality of the final products is very good ,The machine can be used for drying the heat sensitive materials .
5). For the negative pressure or the micro-negative pressure operation ,the machine is good for its tightness and high in the efficiency so as to eliminate the environmental pollution .
Technical Data
Technical parameters
| spec | Barrel diameter(mm) | Main machine dimensions(mm) | Main machine power ( kw ) |
air velocity ( m3/h ) |
Water evaporation capacity ( Kg/h ) |
| XSG-2 | 200 | 250×2800 | 5-9 | 300-800 | 10-20 |
| XSG-3 | 300 | 400×3300 | 8-15 | 600-1500 | 20-50 |
| XSG-4 | 400 | 500×3500 | 10-17.5 | 1250-2500 | 25-70 |
| XSG-5 | 500 | 600×4000 | 12-24 | 1500-4000 | 30-100 |
| XSG-6 | 600 | 700×4200 | 20-29 | 2500-5000 | 40-200 |
| XSG-8 | 800 | 900×4600 | 24-35 | 3000-8000 | 60-600 |
| XSG-10 | 1000 | 1100×5000 | 40-62 | 5000-12500 | 100-1000 |
| XSG-12 | 1200 | 1300×5200 | 50-89 | 10000-20000 | 150-1300 |
| XSG-14 | 1400 | 1500×5400 | 60-105 | 14000-27000 | 200-1600 |
| XSG-16 | 1600 | 1700×6000 | 70-135 | 18700-36000 | 250-2000 |
Product picture
Product pictures
About us
About us
Changzhou Update drying equipment co., ltd is located in Changzhou City, Jiangsu province, China. The geographical position is superior, the traffic is convenient. Company is specialized in manufacturing the drying, granulating and mechanical equipment.
We have developed some high-tech products, optimized and improved the professional equipment by absorbing national and international advanced technology and cooperate with some famous universities.
Now, our product covers over 50 series, 400 kinds of drying, microwave, mixing, granulating and coating equipment etc, which are sold to all over the country and export to the global market.
We would like to extend the best wishes to our friends. Thank you for your support and care about Update's development and we will move forward hand in hand.
Service
Pre-service
Act as a good adviser and assistant of clients to enable them get rich and generous returns on their investments.
1. Introduce the product to the customer in detail, answer the question raised by customer carefully;
2.Make plans for choice according to the needs and special requirements of users in different sectors;
Sale service
1. Ensure product with high quality and pre-commissioning before delivery;
2. Delivery on time;
3.Provide full set of documents as customer’s requirements.
After-sale service
Provide considerate services to minimize clients’ worries.
1.Assist clients to prepare for the first construction scheme;
2.Install and debug the equipment;
3.Train the first-line operators;
4. Examine the equipment;
5.Take initiative to eliminate the troubles rapidly;
6.Provide technical support;
7.Establish long-term and friendly relationship.
Service commitment
1. Provide clients one-year warranty to make sure the machine work well;
2.We always keep certain inventory level of spare parts, which means the replacements can be sent to you timely;
3.Send every client a preferential quotation.