Best quality chemical microwave oven/glass fiber microwave drying equipment
Microwave heating dry glass fiber can be according to yarn, blanket, cloth, blankets and other size,
shape and the drying temperature, film forming time and hardness of the water content and so on
different requirements and characteristics of the design.
Glass fiber of microwave drying and conventional drying (such as steam, electric heating, etc.) than the advantages as follows:
1.glass fiber, both inside and outside to water more thoroughly, uniform, enhanced
(silicone) coating and the adhesion strength of the glass fiber surface.
2.deep in the organic combination of silicone and resin composite membrane
components due to their different dielectric properties of the dry layer form has a
time lag, fastening between the organic silicon layer is resin, the interface failure
rate greatly reduced to improve product quality.
3.glass fiber drawing forming, its surface may have a very small crack, because of
the microwave heating, water vapor from the inner to the outer migration, cylinder
lining the existence of large steam pressure to performance, three pump plus from
the glass fiber glass infiltration agent to the glass fiber surface crack penetration,
is more effective than traditional heating drying method, the strength of the glass
fiber is improved.
4.the traditional heating drying time is long, high heat medium temperature glass
fiber under high temperature condition for a long time, to have great infBest quality chemical microwave oven/glass fiber microwave drying equipmentce on
its strength, and microwave drying time is short, less affected the strength of glass
fiber.
5.low moisture content, finished product moisture content is below 2%.
6.the use of microwave drying of glass fiber products appearance color white and
smooth, flexible, low intensity, hydrophobic, easy coloring and spinning and other
characteristics, in similar products have strong market competition force. Used for
drying: package, glass fiber cloth, short cut fiber yarn regiment, cake, ply yarn
regiment, aluminum silicate fiber blanket, ceramic fiber, glass fiber post-processing
drying, curing FRP, etc.
The characteristics of microwave drying tunnel sterilization machine:
1.convenient production, the use of conveyor belt, with multiple table, effective
bearing and transmission, the material inlet feed, drying or directly discharging
mouth discharge after sterilization.
2.USES frequency conversion motor drive, can effectively adjust the appropriate
transport speed according to the craft, the regulation of free delivery speed, in
order to convenient to adjust production
3.stainless steel tunnel design, effectively prevent steam corrosion material,
reduce the contact with the outside world, to ensure the quality of the products.
4.microwave power can be set freely, according to the processing capacity suitable
power, avoid the waste of energy
Packing and shipping
1.Package: wooden cases
2.Delivery detail: In general ,within 30 days
3.Transportation: by vessel
4.Delivery port: FOB Qingdao
Guarantee and after-sales service
For the whole equipment,warranty is 12 months,within 12 months,if have equipmen
t quality problems,we will provide accessories freely. After the expiration of the war
ranty period,if have spare parts problem,we only receive the cost of required replac
ement parts.We commit we will provide free technical support of equipment all who
le life.
Best quality chemical microwave oven/glass fiber microwave drying equipment