Microwave medicine bottle Sterilization Equipment

Microwave medicine bottle Sterilization Equipment Operating principal:
This microwave source adopts continuous microwave magnetron as its microwave oscillation source. The

continuous magnetron is a kind of cross-field microwave radio tube, the direct current field and

the stationary magnetic field are vertical. The anode of the magnetron is a complex system of resonance.

The anode block consists of many little resonant cavity. Between them there is inductance coupling, so the

anode block is the crossover network of microwave. The electron eradiated from the cathode of the magnetron

will firstly be affected by the direct current field and curl like an angle. While the electrons are moving from

the cathode to the anode, the contrail of their movement is like a swing vibration. Under the condition

of synchronism between high frequency field and electron cloud, the electron contrail will rise toward the anode

direction and form electron spoke.

Among the spoke, while the electrons are carrying through synchronistically,

they will change the potential energy into high frequency energy and increase the high frequency breadth. After the

magnetron is started, the direct current which is instored in the resonance cavity will be changed into super-high frequency energy, finally, microwave source of enough power will exported through wave-guide. So that the water vaporized, to achieve the purpose of drying. This heating is the overall heat, without heat conduction, very fast. Has1 efficient, no energy, 2 is heated evenly and dry, 3fast thermal inertia, 4safety and environmental protection, 5 The operation is simple, easy to control advantages compared with conventional drying equipment. Microwave drying of pharmaceutical, sterilization equipment for medicine, pills dry, high sterilization strip, massive, granular, loose powder and water content, with certain sticky cake and other materials, drying, sterilization, heating liquid sterilization before packaging, packaging sterilization.

structure and characteristics:

The multifunction microwave sterilizing and drying equipment is the upgrading and updating products

of the common continuous microwave one. it may adopt cutting-edge technical means according to

customers requirement, collocated with PLC human-machine interface auto-control system, it is

convenient to set arts and crafts parameters like temperature, power, speed, time and failure warning.
Inside the human-machine interface, the equipment running mimic diagram, the instructions

of equipment operation, the failure maintenancem, knowledge-reading, the enterprises brief introduction

is available for the customers reference.

We can manufacture the Non-standard equipment according to the requirement of customers