Henan haozhou automatic oil machine
Company information:
We are professional manufacturer of screw oil mill and hydraulic oil press equipment.After more than twenty years hard-working,it has developed to high modern enterprise.
Our main products are as following:screw oil mill and hydraulic oil mill. Our factory principle is"Quality is first,Client first" to offer high quality goods and serve clients fully is our working aim.
If there is any ideas about our products,please feel free to contact me,I will give the reply within 24 hours.
Technical parameters specification :
type |
6YL-80 |
6YL-100 |
6Y-120 |
|
Screw diameter |
80mm |
100mm |
120mm |
|
Screw speed |
47r/min |
37r/min |
34r/min |
|
power |
motor power |
5.5KW |
7.5KW |
11kw |
Henan haozhou automatic oil machine pump |
0.55KW |
0.75KW |
0.75kw |
|
Heater power |
2.2KW |
2.2KW |
2.2KW |
|
capacity |
80-150kg/h |
150-230kg/h |
250-400kg/h |
|
weight |
880kg |
1100kg |
1500kg |
|
Size(L/W/H) |
1500*1200*1750 |
1700*1300*1850 |
2000*1300*1500 |
|
Hydraluic oil press:
Range of application:
The technical application of oil mill efficient intelligent integration is popular in the main oil production areas of the world. The oil mill is widely used in the squeeze of oil crops, such as peanut, soybean, rapeseed, sunflower, flax, walnut, suzi, almond, tea seed, cottonseed, sesame, corn germ,etc.
According to the different requirements of oil varieties about temperature, the mill can automatically adjust the oil expelling temperature and oil refining temperature, no affection of seasons and climate, and can meet the best squeezing condition, which means that the squeeze can proceed all the year round. So the oil mill is the best choice for material processing, urban and rural oil plant, small and medium oil factory.
Advantage of hot presser:
1.raw material dried by drying machine ,to reduce moisture of raw material
2.increase activeness and mobility of grease molecules
3.incerase oil yield,to make sure good taste of finished oil.
Disadvantage:break chemical structure composition of oil ,the colour of oil is darker and deeper.
Advantage of cold presser:
1.raw materail pressed by machine directly
2.colour of finished oil is brighter and lighter.
Disadvantage:low oil yield,taste of oil is not so good.
Product advantages:
The oil mill chose the most reasonable gear ratio to maximize energy transfer lossless, achieving efficient, stable, noise reduction transmission effect.
1. Optimization of the gear transmission:
Take the helical gear and straight tooth matching design principle, chose the most reasonable gear ratio to maximize energy transfer lossless, achieving efficient, stable, noise reduction transmission effect.
2. Multistage press:
In order to further improve the quality of oil and meal, the press bore was successfully upgraded to the multistage press, then once again Henan haozhou automatic oil machine the development direction of oil mill.
3. Increased abrasion resistance:
The oil mill’s round row, worm, strip row cause abrasion under pressure. In order to increase abrasion resistance, the factory take cost to update the heat treatment equipment, thus improving the heat treatment temperature and carburizing depth, prolonging the service life of wearing parts, reducing the cost of users.
4. Automatic temperature control, four seasons squeezing:
The press bore is equipped with internal heating device, no mill preheating.
If there is any question, pls kindly write to me, I will answer as soon as possible.