cold press oil machine
Company Information
Product Description
1.WORKING PRINCIPLE:
♦ Transferred by the triangle belt, the electromotor drives the spiral shaft.
♦ The oil plants falls into the first section of the spirals through the feeding part and being carried toward
the end of the machine along with the rotating squeeze spirals.
♦ As the space between the squeeze spirals are getting smaller, the oil plants frictions with each other as
well as the squeeze spirals and the squeeze loops. The pressure in the chest is becoming bigger.
♦ During this process, the oil plants are smashed and big amount of heat is generated, the tissue cells are
destroyed and the oil is separated from the oil plants and flow out from several outlets.
♦ After extracted, the oil plants turns to be cake containing low oil and discharged in thin slices from the end
of the machine. The whole oil and residue separation process is completed.
Under the combined effects of several forces, such as the pressure generated as the space in the squeeze
chest becoming smaller, the propulsion of the revolving spiral axes, the resistance of the multilateral arc curves
on the squeeze loops, the extrusion & friction between the oil plants, oil squeezed from the oil plants comes
out from the squeeze bars and the grooves of the squeeze loops. The residue is conveyed to the end of the
press chest and discharges in thin strips of oil cake from the space between the cake adjuster and the loop for
cake out. Then the whole separation process of oil from oil plants is completed.
2. Product features:
♦ Make oil from seeds and nuts. Oil is for cooking and residue cake is for animal feed or fertilizer.
♦ High working efficiency! Oil press of spiral type just need process the oil plants by one time to get the
maximum oil.
♦ Make high quality healthy oil! Mechanical squeezing craft does not harm the nutrients in the oil. No chemical
substances left.
♦ Cost-Effective! Just need replace the wearing parts. The main machine can run for more than 10 years.
♦ Has different models with different processing capacities, from 50kgs to 800kgs per hour per piece.
3.Purchase flow charts:
Certifications
contact
