2016 olive oil pressing machine/machinery/ plant/ equipment/oil pressing machine
Factors should be considered to raise the oil extraction rate of automatic oil press machine
The technical and economical indexes such as oil extraction rate and production capacity, is the first concern of customer to value a product. Only if it can be qualified in the pressing technology, and can work 24 hours continuously (at least one shift), can it get good economic benefit. Indexes of extraction rate and production capacity mean the average value of continuous work. So, no good economic benefit can be made if it works off and on, or only press tens of or hundreds of oil plant, either can it be the evidence of valuing the machine.
It should be pointed out that, some customers use the conception of extraction rate(the quantity of oil can be made from per hundred oil plants), which is not scientific. The quantity of oil made relates to such factors without any doubt, as the content of oil in raw material, the technology used, and the operating way. The finalizing spiral oil press machine is mainly to ensure high extraction rate and low resid rate in dry cake.
operators
The main factors includes being unskilled, low operating skill, failure to obey the operating rules, as well as being careless, poor quality con sciousness, bad cooperation, low effective utilization of equipments.
machine and equipments
Though the new machine was inspected to be qualified when leaving the factory, it may be damaged through store, load and discharge, and transport. Especially the unappropriate installation and adjustment, the low assembly quality, the wrong using and maintaining not in accordance with the safe operation rules.The frequent man-made debugging, repairing, directly inf2016 olive oil pressing machine/ plant/ equipmentt the oil quality and production capacity. Once start a new machine, we must de-rust the pressing chamber, do the running-in, and try to press, try to raise the temperature of pressing chamber, to keep the inlet and exit way clear, before the formal pressing.
the oil plant being pressed
It can inf2016 olive oil pressing machine/ plant/ equipmentt the extraction rate and production capacity directly, if the material contains too much impurities, or the quality of it is low. The impurities(organic impurities such as stem and leaf of plants, the hard outer shell, wormwood, hemp rope, pieces of cloth, scraps of paper and all kinds of grain. Inorganic impurities such as dust, clay, dinas, and broken tiles) caused during harvest, basking. Transport and store, and the oiliness impurities(sick grain damaged by insects, not full grain and foreign oil seed), metallic impurities(nails, bolts), should be cleaned and screened by machine equipments, and be preprocessed according to the requirement.
2. Pressing time
Time taken in pressing relates to the oil extraction rate somehow. Generally supposed, the 2016 olive oil pressing machine/ plant/ equipment it is pressed, the slower the oil flows out, but the pressing time can’t be over long, or the heat can be consumed too much, and then inf2016 olive oil pressing machine/ plant/ equipmentce the oil extraction rate and production capacity. So, try to shorten the pressing time on the basis of satisfying the needs of oil extraction rate. It depends on the roll speed of squeezer shaft mainly how long will the material embryo stay in the chamber. For some high oil material, the pressing time can be extended appropriately, the roll speed should be chosen appropriately.
6YL series spiral press machine belongs to the high speed and thin cake machine, high speed means the high speed rolling of the main shaft, the material embryos stays short in the chamber(general tens of seconds), The thin cake means the thick of cake is 1.5-3.0mm, so, the worm and worm ring can be abraded fastly. According to the experiment, the machine should be checked after every 40-50 tons of oil material is pressed, and the vulnerable parts should be changed(especially for worm 3-4 and the adjusting cake device.)Because the 6YL series spiral pressing oil machine can finish the pressing in a short time, it is good for some oil materials(such as cold pressing soybean, and the protein protected), but the other materials will be redistricted to reduce the resid in the dry cake, different oil material should have different roll speed of main shaft.
Packaging & Shipping
Olive Oil Press Machine can be packed in wooden case, several 40ft containers.
Our Services
Olive Oil Press Machine Services:
1. Turnkey Project Accepted;
2.Installation and Commissioning Guidance Supply;
3. 1 Year gurantee, long term technical support;
4.Training your local staff;
5.MSK long term cooperation shipping line;