Flaxseed Oil Machinery With Advanced Solvent Extraction Technology
Product Description
Flaxseed pretreatment and prepressing plant
1.Better dust removal system, to ensure plant clean, reduce dust emissions at the same time.
2.More recycling measures, reduce man-made wrong operation, especially not forming cake cycle, greatly reduce the manual labor intensity when driving.
3.Vertical softening conditioning pot, cooking pot, covering a small area, save construction investment.
4.Scraping machine has anti-blocking and stall protection switch, bucket elevator has anti-blocking , stall and off tracking protection switch.
5.Automatic control degree is high, when subsequent transmission equipment malfunction, the conveying devicein front will automatically stop.
6.Gas from dust removal equipment is comply with national environmental requirements.
7.Part blower adopts frequency conversion adjustment, can be adjusted according to the raw material moisture content, reduce power consumption.
Extraction process and characteristics of the equipment
1.Using the new ring of III type extractor. large capacity circulating pump, osmotic effect is good, the wet meal containing low solvent, in a smaller proportion of the feed material and solvent can guarantee the residual oil in meal is≤1.2%, improve the mixed oil concentration, reduce the wet meal containing solution, reduce the number of evaporation of the solvent, material level recombination device.
2.By Flaxseed Oil Machinery With Advanced Solvent Extraction Technology evaporation, twice use of technology, reduce the evaporation temperature, Use mixed with steam from the DTDC and the exhaust steam of steam jet pump discharge to heat first one steam, Saving the steam heating for first one steam.
3.Use energy-saving device to steam condenser and the condenser shell not condensed liquid directly into the water tank after heat exchange, make condensate into water tank temperature increase;in normal production condition,solvent without preheating can directly enter the extractor.
4.The use of heat exchanger paraffin recovery process, high temperature wax lean with Low temperature wax rich oil into heat exchange, save some energy.
5.Collected all the steam water in extraction plant's use the pump into the boiler room two times using.
6.Application of high quality steam trap, can make the workshop steam consumption lower, Collected all the condensate use the pump into the boiler room for boiler circulating use, saving boiler water volume and heat.
Refinery Plant Craft Features:
(1) Adopts the full automatic control, full sealing and full continuous refining craft, in this craft the oil is not easy to oxidize, and there are no phenomenon of oil run, drop, leak. And loss less energy which has significant effect of energy saving.
(2) The decolorizing process adopts full mixing craft. The clay can mixed averagely and the temperature of oil can be controlled easily, also have good decolorizing effect.
(3) The clay is transported by wind, in full sealing condition, there are no leakage in the workshop; Adopts unique feeding device, which can feed materials averagely and save efforts.
(4) The addition of clay adopts self control quantitative device, it can adjust the addition quantity of clay according to the input changes of oil.
(5) This craft is running in whole negative pressure, which reduce the cooling and warming process in traditional craft's working sections, to save much energy.
(6) Take full advantage of deodorization oil's high energy, calculate and assemble oil-oil heat exchanging system, at the same time increase a set oil-oil heat exchanger in degumming section, to make use of the afterheat further, which achieve the energy saving and low down the consumption.
(7) Adopts strict insulation measures to all the oil and vapor pipelines and equipments to avoid the loss of energy.
(8) Adopts recovery measures to vapor and condense water, supplement them to hot water tank.
(9) The Flaxseed Oil Machinery With Advanced Solvent Extraction Technology system adopts domestic advanced space technology steam-jet pump.
Process Flow Chart 
Company Information
Henan Huatai Cereals And Oils Machinery Co., Ltd. is a manufacturing enterprise specialized in producing oil machinery in China and have become listed company in December, 2014. Established in 1988, Huatai covers an area of 100,000 square meters and has 180 senior engineering technicians. Our company has 280 sets of automatic processing equipment. Processing capacity of our enterprise is more than 3000 sets every year. Huatai has obtained independent export rights and has passed the evaluation of ISO9001:2000 Quality System Management Certification. We are the outstanding membership corporate of Chinese cereals and oils association, and they do quality quarantee for us. We have got 23 national patents (including 7 invention patents, 6 international medals, 2 national awards and 2 provincial prizes).
Our Factory
Main Equipments
Our International Exhibitions
Certifications
Customer Visiting
Contact
