100T/D peanut oil cake solvent extractor with rotocel extractor, DTDC desolventizer toaster,miscella tank 1st ,condenser

100T/D peanut oil cake solvent extractor with rotocel extractor, DTDC desolventizer toaster,miscella tank 1st ,condenser

Brief introduction of solvent extraction plant

The solvent extraction plant is part of vegetable oil processing plant which is designed to extract oil directly from oil seed containing less than 20% oil like soyabean fter flaking or it extracts oils from prepressed or fully pressed cake of seeds containing more than 20% oil like sunflower, peanuts, cotton seed, palm kernel, canola, copra, castor and variety of other materials.

Rotocel extractor is the main equipment in oil solvent extraciton process project, Its frequency conversion can adjust the speed of cell our capacity , chain driven makes the operation stable and satety, Stainless steel fixed plates are used, Thus extractor has large surplus capacity . It is helpful to expand capacity in the future .,Meanwhile , High material level improves extraction effciency ,Extractor has 16or 18 cell, Cross grids is applied to prevent the mix oil flowing backwards into the final meal-dropping cell, Cycling solvent pumps have large flux , Low head , good sealed ,low noise ,stable

Main process of solvent extraction plant

1) The material (for pretreatment) is sent to rotary extraction by the scraper conveyor. The material will extracted by the solvent or mix oil. After this step, we will get meal and mix oil.

(2) Meal is sent to toaster. Through the toaster, the solvent in the meal will separate from the meal. The solvent goes to condenser and is recycled to rotary extraction.

(3) After the mix oil from the rotary extraction enters into 1st evaporator and 2nd evaporator, most of the solvent in the mix oil is separated.

(4) The mix oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower, we can get crude oil and solvent. The solvent is sent to condenser and is recycled to rotary extraction

Main equipment of solvent extraction plant

1. Solvent pumps: continuously spray solvent to the rotary-type extractor

2. Rotocel extractor: Spray and soak the pre-pressed cake with solvent so that oil fats can be diss-olved in solvent(form miscella). After processing, you can get wet meal and miscella (mixed oil).

3. DTDC: usd to separate the solvent from the wet meal.

4. Miscella tank 1st: pump the miscella (oil with solvent) in to the miscella 1st , then add saline water to it. The phospholipid in the miscella will react with the saline water, at last the reactant precipitate, reaching the goal of purifying.

5. Miscella tank 2nd: the purified miscella will be pumped into it.

6. Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for recycling.

7. Condensers: used to cooling the solvent gas separated from the wet meal and miscella for recycling.

Zhengzhou 100T/D peanut oil cake solvent extractor with rotocel extractor, DTDC desolventizer toaster,miscella tank 1st ,condenser Indutech Machinery Co., ltd (hereafter referred to as "100T/D peanut oil cake solvent extractor with rotocel extractor, DTDC desolventizer toaster,miscella tank 1st ,condenser") is a joint-stock machinery manufacturing enterprise, integrating industrial scientific research, production and marketing. The company is located in the Industry Area Zone of Zhengzhou, China.

100T/D peanut oil cake solvent extractor with rotocel extractor, DTDC desolventizer toaster,miscella tank 1st ,condenser offer not only products with good quality and competitive price, but also top service and solution.

Website: www.100T/D peanut oil cake solvent extractor with rotocel extractor, DTDC desolventizer toaster,miscella tank 1st ,condenser.com

1.Pre-sale services:

1) Selecting equipment type;

2) Designing and fabricating the products in accordance with the special requirements of the clients;

3) Training technical personnel for our clients;

4) Providing construction and technology consultations or working out proper construction schemes for those new, special or difficult projects.

2.Services provided during the sale:

Respect our clients; present the clients with ease, relaxation and a surprise; devote ourselves to improve the total value of our clients.

1) Checking products acceptance ahead of delivery;

2) Introducing the service system to our clients.

3. After-sale services:

Improve the added value of our products, and let the clients free from the using troubles:

1) Assisting the clients preparing for the first construction scheme;

2) Installing and testing the equipments;

3) Training the first-line operators on site;

4) Examining the equipment regularly;

5) Taking the initiatives to eliminate the failure(s) rapidly at site;

6) Distributing the guarantee fittings door-to-door;

7) Providing technical exchanging;

8) Providing maintenance for big item

1.Waterproof packing with the international export standard by 20ft, 40ft, 40hp container.

2. Equipment Fittings, Electric Motor and Power Cabinet will be packed in Wooden Case or Iron Box. Other Equipment will be packed by Color-Stripes Plastic Cloth.

3. Or as per customer's requirements.

If you want to know more information , Pls to contact us

Tel: 0371 55933391 Fax: 0371 55919082