palm oil extraction machine

palm oil extraction machine

Product Description

I . Overview of palm oil extraction machine

1. Capacity: palm fruit and kernel pressing plant

2 .End products :crude palm oil and kernel oil

Item	End products	Yield
1	Crude palm fruit oil	20%
2	Palm kernel oil	2%

3. Power consumption :380V 50HZ three phrase power

II . The productive technology of palm oil extraction machine

Palm oil mill process is quite different from other oil seeds processing, such as the soybean , peanut etc. Palm fruits consists a lot of fatty acid enzyme, which would hydrolyze palm oil. That's the reason why palm fruit must be sent into processing in 24 hours.

The working process

Step 1 . Palm Fruit Reception

Collecting the ripe fresh cluster from the orchard and convey by trucks,

then pour the fluster into the discharge door after weighed by ground weight .

Step 2 . Sterilization Station

Fresh palm fruit bunch are airtight sterilized in sterilizer, injecting direct steam (the pressure is 300KPa) to heat 60mins. The purpose is to prevent enzymes broken down, avoiding FFA content in oil further increase.

step 3. Threshing Station

The purpose of threshing is to separate the palm fruit from the FFB.

The drum type thresher is the usual machine to separate the fruit.

The separated oil palm fruit is sent into the pressing section.

Empty fruit bunch be ejected to the yard from the other side of the revolving drum, or shipped out from the plant as palm orchards slipcover to recycling use, or burning in the locale as fertilizer for agricultural land.

step4 . Pressing Section

There is also the steam heater in masher.

The purpose of mashing is to separate the pulp and nut and crush the palm pulp.

At the same time, the steam is used to cook the palm fruit and broke the cell of pulp.

Because of cooking, sterilizing, threshing and mashing made the pulp soft and damage pulp cell structure, the palm pulp becomes soft and cell is broken.

Then it is sent to continuous screw press.

After pressing, oil palm fruit is divided into two parts:

the mixture of oil,

water and solid impurities,

and the press cake (fiber and nut)

step 5. Clarification Section

Machine-pressed crude oil first diluted with water washing, through settlement and filtration, the fiber material removed from the oil, and then carry out continuous settlement,

the whole divided into two parts: oil and sediment.

A. Oil by centrifugal separation and through palm oil extraction machine drying pumped into the storage tank for storing;

B. oil sediment by filtration and dirt oil separation, oil process second settlement, dirt oil mixture process clarification separation, Skim oil then carry out a second settlement, sewage pumps to sewage treatment pond for dealing with.

step 6.Depericarping Station

Press cake broken by breaking screw conveyor and then transported into the fiber separation air net and fiber polishing roller for fiber separating.

The separated fiber material is sent to the boiler room as fuel;

the separated stone is transported to stone warehouse by pneumatic conveying system for temporary storage.

step 7. Kernel Pressing Section

step 8. Boiler and Power House

step 9 . Raw Water Treatment

Packaging & Shipping

We will pack by the protect film inner, water-repellent plastic outside.

The wood packing is necessary if send by less than a container.

The machine will fixed by steel rope in the container. Make sure it is in good condition when arrived destination.

Our Services

Our company always put the interests of customers and product quality of the first place, and always adhere to

the" no best, only better" as their purpose. We will be commitment to provide high quality products with perfect site services and after-sales service. Now the specific commitments as follows:

1. Ensure to timely provide complete sets of equipment and accessories.

2. Ensure that one-time installation debugging acceptance.

3. To provide high quality material with preferential price.

4. Priority to provide customer our new craft works and products.

5.Free training technological operator to ensure the trained staff can independent operation.

6.In the installation process, we will appoint a installation supervision staff on the spot. we will offer an experienced project manager, organize a good installation team for the work of field installation debugging.

7.After the equipment field assembly and installation, we will be also responsible for the single equipment debugging, on-line debugging and Feeding trial operation ,to ensure that equipment can normal operate in full load conditions. We will provide all kinds of information and records according to the requirements of the bid. The qualified completion files will be provided to customers according to their requirements within one month after acceptance.

8.warranty period, all because of the quality of products has caused the damage or failure of equipment, suppliers responsible for the free repair and replacing spare part. Due to the damage caused by the customer, we only charge material costs for repair and replacement. After the receipt of customers notice, suggest the method to solve problem within six hours, or send personnel to the site to solve the problem within twenty four hours.

Place of Origin	China
Brand Name	palm fruit machine
Certification	SGS, CE, ISO-9001
Model Number	palm fruit machine
Min.Order Quantity	One set palm oil extraction machine
Price	[email protected]
Packaging Details	according to the plant
Delivery Time	contact with us
Payment Terms	paypal,UnionPay, Visa/MasterCard, Amex, Discover,T/T
Supply Ability	162

Product Features