High efficiency oil finery equipment

High efficiency oil finery equipment

1. Introduction of High efficiency oil finery equipment

Solvent condensation system combines with evaporation system closely, and evaporative condenser and steam stripping condenser all work under negative pressure.

Non-condensable gas enters the energy saver from the shell of the first evaporator. In energy saver, non condensable gas exchanges heat with condensate from the evaporative condenser.

Finally, the condensate temperature discharged from energy saver is increased, and the solvent separated water from going to the solvent holding tank.

The high temperature makes it unnecessary to be reheated for the recycling, so as to save energy. Non condensable gas from energy saver enters de solventizing condenser, in which a great deal of gas is condensed, and the tail gas is discharged into the final condenser.

The solvent gas from the extractor enters extraction condenser, and the non condensable tail gas enters the final condenser.

For the free gas in final condenser, diversion box, holding tank, underground solvent library and mis cella tank, cool them with low temperatured cold water to recycle most of solvent gas. The tail gas with little solvent goes to paraffin recovery process.

2. Main parts of High efficiency oil finery equipment

(1) Solvent pumps: continuously spray solvent to the rotary-type extractor

(2).Roary extractor: Spray and soak the pre-pressed cake with solvent so that oil fats can be dissolved in solvent(form miscella). After processing, you can get wet meal and miscella (mixed oil).

(3). DTDC: usd to separate the solvent from the wet meal.

(4). Miscella tank 1st: pump the miscella (oil with solvent) in to the miscella 1st , and then add 10% saline water to it. The phospholipid and impurities in the miscella will react with the saline wter, at last the reactant precipitate, reaching the goal of purifying.

(5). Miscella tank 2nd: the purified miscella will be pumped into it.

(6). Miscella stripping: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for recycling.

(7). condensers: used to cooling the solvent gas separated from the wet meal and miscella for recycling.

3. Main Process of High efficiency oil finery equipment

(1) The material (for pretreatment) is sent to rotary extraction by the scraper conveyor. The material will extracted by the solvent or mix oil. After this step, we will get meal and mix oil.

(2) Meal is sent to toaster. Through the toaster, the solvent in the meal will separate from the meal. The solvent goes to condenser and is recycled to rotary extraction.

(3) After the mix oil from the rotary extraction enters into 1st evaporator and 2nd evaporator, most of the solvent in the mix oil is separated.

(4) The mix oil from 2nd evaporator goes to stripping tower and almost all the solvent is separated. From the stripping tower, we can get crude oil and solvent. The solvent is sent to condenser and is recycled to rotary extraction.

4 . Advantages of High efficiency oil finery equipment

(1) High oil yield , obvious economic benefit .

(2) Residual oil rate in the dry meal .

(3) Improving the quality of the meal .

(4) Low processing cost , high labor productivity.

Package: Wooden case or plain packaging for High efficiency oil finery equipment.

Shipment: By sea, 20GP, 40HQ or 45HQ for High efficiency oil finery equipment.

Pre-sale

System evaluation: 1. Project basic situaction

Solution: 1. The investment budget 2. Site measurement 3. Technical discussion

Product selection: 1.Factory inspection 2. Site measurement 3. Technical discussion 4. Supply professional drawing and lists

Win-win cooperation: 1. Sign the contract 2. Wstablish mutual benefit, strategic cooperative partnership.

In-sale

Design evaluation: 1. Detailed technical assessment, arrangement 2. Design of process and equipment layout

Procurement: Strictly inspection, optimized selection.

Installation: 1. Quality and quantity guaranteed 2. Completion of hand over

Acceptance: 1. Acceptance test 2. Accepted deliverables

Technical traning: 1.On-site installation and products training 2. Operation skills training 3.Maintenance training 4. Centralized technical training

After-sale

Technical service: Long time technical service

Accessories supplying: Supplying spare parts with cost

Complaint handling: 12-24 hours response mechanism

Client Review: 1. Call-back 2. Regular return visit.