Donut frying machine
Product Description
Donut frying machine description
1.The machine is made of stainless steel.
2.automatic forming equipment.
3.automatic temperature controller and automatic turn the donut.
4.the height of outlet can be adjusted according the level of the oil because the machine use the screw to
adjust.
5.can adjust the thickness of the donut through adjusting the amount of the materials.
6.electrical controller to control the whole process.
Donut frying machine Introduction
1. Stainless steel, energy efficient heating appliances, automatic molding, automatic temperature control
function, automatically turn the cake, using screwtype adjustable device, discharge port can be up and down arbitrarily according to the height of oil level. The hypertrophy of donut can also be adjusted by how much of
the material.
2. There are two options of the discharged donut number, one or two one time. On the dashboard there are
two switches, one is electrical discharge and the other is linked discharge switch.
3. This machine use precise orbit devices, import motor, which maintaining equipment vibration in the smallest value.
4. Large hopper design can hold 7L material. Simple operation and high efficiency
Features
Donut frying machine characters
1.Stainless steel donuts machine.
2. Full-automatic: molding, blanking, frying and outputting
3.Smart temperature controller .
4.Easy to operate&clean.
5. Famous brand motor. Quality assurance, permanent repair.
6. Good after-sale service
Technical parameter
Donut frying machine Technical parameters
Name | Automatic donut machine | Automatic donut machine |
Model | ODM-1 | ODM-2 |
Power(kw) | 3 | 6 |
Voltage(v) | 220 | 220 |
Machine size(mm) | 1100*550*650 | 1100*550*650 |
Packing size(mm) | 1110*610*480 | 1110*610*480 |
Net weight(kg) | 38 | 58 |
Gross weight(kg) | 41 | 62 |
Remark | stainless steel | stainless steel |
More photos
More photos
FAQ
How to make good donut?
A.If you are making the big donut (40 mm outlet),please turn to 9-10 seconds.
It can become 80-83mm after it was fried.
B.If you are making the middle donut (36 mm outlet),please turn to 7-8
seconds.It can become 70-75mm after it was fried.
C.If you are making the mini donut(20 mm outlet),please turn to 4 seconds. It can become 38mm after it was
fried.
We suggest that you‘d better used the 36MM outlet If you are a freshman.You can turn to more seconds If you were in a winter day.
FAQ
What is a right dropped place?
When the machine runs, the donut will drop in the middle of the 2 rolls of the
sticks. Prevent the donut from dropping on the sticks.If the hole dropped not
the very right to the place, you can push this machinery hand to adjust it.
How to use
1.Open the button of power, when the temperature reach 180°C,
then OK for the donuts.
2.Put the batter mix into the hopper, then adjust the knob to make
donuts using donut making machine.
3.Machine can make donuts itself now.
How to clean the tank?
Very easy. You must wait the oil cool down. First pull the frame out of the
body.Turn the 2 heaters to the back, and then pull the tank to leave from the
body.
Packing
....