Full automatic gypsum wallboard manufacturing facility/gypsum board production line/gypsum board making machine
Product Description
- Annual capacity of gypsum wallboard manufacturing facility:
2 to 30 million sq.m
- Type:
Hot air and hot oil
- Degree of automation:
Fully automatic and semi automatic
- Fuel for the boiler:
Natural gas,coal,desel,heavy oil,light oil etc
- Final product specification:
Common,fireproof,waterproof gypsum board
7 to 15mm in thickness
1800 to 3600mm in length
1200 and 1220mm in width
Detailed Images
Paper supply system__________________________________________________________________
Myabe your concerns are as follows for this part:- Broken rate of paper
- Degree of automation
Advantage of the mixer system:Mainly consists of paper slurry,foaming agent,starch,water and additive etc
All slurry has the feedback signal of level indication and chain control each batching process according to the process requirement
- This part is mainly the forming of wet gypsum board
- Can be adjusted manually
Cutting system_______________________________________________________________________
- Whole cut control algorithm is achieved by the separate PLC.
Drying room_________________________________________________________________________
- Low heat consumption, heat preservation is good
The application of final product gypsum board:
- Suspended ceiling
- Partition wall
Production Flow
Hot oil pipe
Belt conveyor scale
Mixer machine
Shaft hesdMachining advantages of gypsum board machine:
- All the raw materials and finishing treatment are certified by our suppliers and must passreceiving inspection before they are released for production;
- Products are precisely machined with high assembling accuracy.
Above loading photos are for your reference:
1. | All the electrical parts will load in wooden case,and others will in nude packing or bulk etc. |
2. | And all the goods will load in 40HQ,if the boiler is over weight or oversize then will load in framework or bulk freighter. |
3. | All of the packaging will be suitable for long distance transportation. |
4. | If you have any requirements about the packing,we will do it according to that. |
Trade Shows
Service idea:all the customer concern is supposed to be paid close attention, fulfil our trust,
try our best to enter the acme of perfection.
Company Information 
- Factory area:40000sq.m
- Direct manufacturer with 16 years experience till 2015;
- Our company has its own R&D team,then we can continuously provide customers with Full automatic gypsum wallboard manufacturing facility/gypsum board production line/gypsum board making machine technology;
- Has its own installation and debugging team;
- Service tenet:outstanding idea,excellent team, high quality service.
Our Services
1.Guarantee:
3 years (except the easy worn parts such as bearings, electric buttons).
2.Installation and debugging:
2 to 4 months when the buyer prepare the installation and commission conditions.
3.Technology training:
Provide free training.
4.In order to guarantee the machine running, each year we will send engineer to check
and development the technology with the buyer.
5.If the buyer can not run the machine well then we will send the production engineers to help
the buyer to run the machine, and we can cooperate for long terms.
Contact us___________________________________________________________________Pls feel free to contact us,we will give you reply within 24hours!Contact person:David ZhaoMobile number:008618669967658
We want to know________________________________________________________________
- Do you have gypsum powder?If have,pls give us its test report.
- How much annual capacity do you interested in?Our offer is based on an assumption that the final product of gypsum board is 9.5mm in thickness.
- Which type of the fuel for heating?natural gal,coal,diesel,heavy oil or light oil?
- Method of the drying room?Hot air or hot oil?
- Pls tell us your land area.
- Degree of automation of gypsum board production line?